Total views : 1113181

Investigation of Mechanical and Microstructure of Fine Graincopper via Friction Stir Processing Method

Affiliations

  • Faculty of Mechanical Engineering, Department of Manufacturing, Shahid Rajaee Teacher Training University, Tehran, Iran

Abstract


Objectives: In this study, Friction Stir Processing method is used to decrease grain size and increase the materials strength. Methods/Analysis: Produced with this process are the production of parts with fine-grained structure without porosity, being environmentally friendly, availability and ease of having mechanical properties. Application of coarse grain copper in medical science is an important problem, because release of dangerous materials during the time, while this problem could be removed by decrease of grain size and increase its applications. Process varying conditions are included as size of tools shoulder, speed and number of passes, each one possesses its specific effects. Findings: By increasing of improvement speed and number of passes besides decrease of rotational speed, grain size decreased while strength and consolidation increased. Novelty/Improvement: Investigating the effects of friction stir processing on the mechanical and microstructure changes of copper.

Keywords

Dynamic Re-Crystallization, Fracture Strength, Hardness, Pure Copper, Severe Plastic Deformation

Full Text:

 |  (PDF views: 59351)

References


  • Zhilyaev AP, Oh-ishi K, Langdon TG, McNelley TR. Microstructural evolution in commercial purity aluminum during high-pressure torsion. Materials Science and Engineering. 2005 Nov; 410–411(1):277–80.
  • Huang X, Tsuji N, Hansen N, Minamino Y. Microstructural evolution during accumulative roll-bonding of commercial purity aluminum. Materials Science and Engineering. 2003 Jan; 340(1-2):265–71.
  • Szczygiel P, Roven HJ, Reiso O. Annealing of Al–Si alloys after equal-channel angular pressing. Materials Science and Engineering: A. 2008 Oct; 493(1-2):202–6.
  • Lugo N, Llorca N, Cabrera JM, Horita Z. Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion. Materials Science and Engineering: A. 2008 Mar; 477(1-2):366–71.
  • Kommel L, Hussainova I, Volobueva O. Microstructure and properties development of copper during severe plastic deformation. Materials and Design. 2007; 28(7):2121–8.
  • Hosseini E, Kazeminezhad M, Mani A, Rafizadeh E. On the evolution of flow stress during constrained groove pressing of pure copper sheet. Computational Materials Science. 2009 Jun; 45(4):855–9.
  • Xu XX, Nie FL, Zhang JX, Zheng W, Zheng YF, Hu C, Yang G. Corrosion and ion release behavior of ultra-fine grained bulk pure copper fabricated by ECAP in Hanks solution as potential biomaterial for contraception. Materials Letters. 2010 Feb; 64(4):524–7.
  • Kommel L, Hussainova I, Volobueva O. Microstructure and properties development of copper during severe plastic deformation. Materials and Design. 2007; 28(7):2121–8.
  • Mishra A, Martin M, Thadhani NN, Kad BK, Kenik EA, Meyers MA. High-strain-rate response of ultra-fine-grained copper. Acta materialia. 2008 Jul; 56(12):2770–83.
  • Elbasset A, Lamcharfi T, Abdi F, Mrharrab L, Sayouri S. Effect of doping with cobalt or copper on the structure of lead titanate PT. Indian Journal of Science and Technology, 2015 Jun; 8(12):1–6.

Refbacks

  • There are currently no refbacks.

Comments on this article

View all comments


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.