Indian Journal of Science and Technology
DOI: 10.17485/ijst/2016/v9i40/103279
Year: 2016, Volume: 9, Issue: 40, Pages: 1-5
Original Article
JongHo Back1 , JeanSoo Kim2 and DongYeop Lee3*
1 Department of Pathology, Eulji University Hospital, Korea; [email protected]
2 Department of Clinical Laboratory Science Daejeon Health Institute of Technology, Korea; [email protected]
3 Department of Physical Therapy, SunMoon University, Korea; [email protected]
*Author for correspondence
DongYeop Lee
Department of Physical Therapy
Email:[email protected]
Objectives: This research was conducted to look for the vest conditions of Hematoxylin-eosin staining. Methods/ Statistical Analysis: Method was investigated the Hematoxylin-eosin staining, Microscopy and RGB analysis. Findings: The result was as follows. The thickness of the optimal condition is 3 cm, the time of the optimal Hematoxylin 4 minutes 30 seconds and eosin 3 minutes 45 seconds. Also, RGB analysis was green. So green showed a significant difference in the change width to each stage, and the biggest change was 52.74 at 2㎛ and 3㎛. Improvements: Therefore, an appropriate fixed time is needed to be found to get staining intensity and sharpness, and the freshness of reagent for each stage should be maintained
Keywords: Eosin, Hematoxylin, RGB, Microscopy, Stain
Subscribe now for latest articles and news.
