Indian Journal of Science and Technology
DOI: 10.17485/ijst/2016/v9i1/85757
Year: 2016, Volume: 9, Issue: 1, Pages: 1-4
Original Article
V. Gunasekaran* , K. Mohanasundaram, M. Dhandapani, S. Tamilselvan and S. Arivarasan
Department of Electrical and Electronics Engineering, Vel Tech Multitech Dr. Rangarajan Dr. Sakunthala Engineering College, Avadi, Chennai - 600062, Tamil Nadu, India; [email protected], [email protected], [email protected], [email protected], [email protected]
*Author For Correspondence
V. Gunasekaran
Department of Electrical and Electronics Engineering, Vel Tech Multitech Dr. Rangarajan Dr. Sakunthala Engineering College, Avadi, Chennai - 600062, Tamil Nadu, India; [email protected]
Background:Due to greater potentialto accelerate a wide variety of application, reconfigurable FPGA has become a subject to great deal of research. The FPGA has ability to perform computations in hardware to increase the system performance, while retaining much of the flexibility of software solutions. In recent development, the real-time embedded system are increasingly being built with COTS components namely mass-produced peripherals and by reducing cost through buses and performance improvement. But the available COTS systems do not guarantee any timeliness and do not implement any priority scheduling mechanism. Methods/Statistical Analysis: This article deals with a new approach to create an RTOS based reconfigurable COTS design for FPGA platform. Thereby RTOS kernel is designed for FPGA and COTS system designed on the FPGA. Application/Improvements: At runtime, the hardware tasks are scheduled and allocated system resources like I/O, memory, etc. to successfully export multiple virtual devices for a single physical device.
Keywords: FPGA, RTOS based Reconfigurable Commercial-off-the-Shelf
Subscribe now for latest articles and news.