Indian Journal of Science and Technology
DOI: 10.17485/ijst/2015/v8i26/81202
Year: 2015, Volume: 8, Issue: 26, Pages: 1-5
Original Article
Ok Kyun Kim1 , Kang Bo An2* , Ji Hye Kim1 , Sung Wook Kang1 and Hyung Hwan Baek1
1 Department of Biochemistry, College of Medicine, Kyung Hee University, Seoul, Republic of Korea
2 Department of Biomedical Engineering, Nambu University, Gwangju, Republic of Korea; [email protected]
The purpose of the system design when using the CO2 laser beam to the contact area to prevent heat damage. Changes in output and the pulse of the laser to investigate the correlation between the temperature and Safe procedure, based on data detected by the temperature of the automatic return (control) system is proposed. First, the normal procedure of the rough as medical device approved for CO2 laser, Manufacturers for the purpose of presenting symptoms in the range of thermal damage, do not express. Second, users of the skin tissue when used to induce clotting, Confirmed by experiments. Irradiation time and energy in proportion to the intended expression of heat damage, but too much of the damage that can result. Third, the temperature detection data based on the detection of laser distance sensor and a non-contact could be infrared temperature detection sensor configuration. The operating temperature of the irradiation time and energy to set and the signal sent to control the intensity. As a result, the effect of CO2 laser of fine focus was confirmed that the change in focus in a distributed.
Keywords: CO2 Laser, Laser Energy, Skin Tissue
Subscribe now for latest articles and news.
