Indian Journal of Science and Technology
DOI: 10.17485/ijst/2017/v10i31/92423
Year: 2017, Volume: 10, Issue: 31, Pages: 1-12
Original Article
D. Prabhakar1, P. Mallikarjuna Rao2 and M. Satyanarayana3
1Department of Electronics and Communication Engineering, DVR and Dr. HS MIC College of Technology, Kanchikacherla –521180, Andhra Pradesh, India; [email protected]
2Department of Electronics and Communication Engineering, Andhra University College of Engineering (AUCE), Visakhapatnam – 530003, Andhra Pradesh, India; [email protected]
3Department of Electronics and Communication Engineering, Maharaj Vijayaram Gajapathi Raj (MVGR) College of Engineering (Autonomous), Vizianagaram – 535005, Andhra Pradesh, India; [email protected]
Received Date:01 July 2017, Accepted Date:02 August 2017, Published Date:07 August 2017
Objective: This research paper focuses on the simulated design and its analysis of 2 element microstrip patch antenna arrays with Quarter wave transformer feed and mitered bend feed network that is widely used in ISM frequency bands in the field of wireless communications. Methods: Various types of microstrip array antennas using Quarter wave transformer feed and with miter bend feeds are designed using HFSS 13.0 and fabricated by photolithography technique using FR-4 substrate, which is tested using VNA E5071C. Findings: The optimum performance of the feeding system is based on various antenna parameters. Here 1X2 array antennas are designed. Miter bends are used for better impedance matching. Usage of miter bends declines the reflection coefficient. There is improvement in gain by using miter bend feed network. Applications: Good impedance matching, optimum reflection coefficient and high gain are acheived by metered bends. The obtained results show that the designed antenna is an apt tool for communications.
Keywords: Corporate Feed, HFSS, Microstrip Antenna, Mitered-Bend Feed, Quarter-Wave Feed Transformer, Reflection
Subscribe now for latest articles and news.
