Indian Journal of Science and Technology
DOI: 10.17485/ijst/2015/v8i19/77052
Year: 2015, Volume: 8, Issue: 19, Pages: 1-6
Original Article
Jonnalagadda Raghavendra∗ and T. Vigneswaran
School of Electronics Engineering, VIT University, Chennai - 600127, Tamil Nadu, India;
[email protected], [email protected]
Background: In Digital Signal Processing (DSP) the complex arithmetic instructions are mostly used. The decoding of these instructions usually takes more time in many applications. Methods: The objective of this research work mainly focused on the delay reduction by decreasing the partial products with the help of higher radix booth recoder. The booth recoder plays a key role in fused add-multiply operation for partial product generation. Findings: The proposed fused add multiply unit reduces the delay by reducing the number of partial products which is very useful for fast arithmetic circuits. The fused add-multiply units are simulated in Xilinx® 14.3 ISE in Virtex-5 environment and synthesized in Cadence® RTL Compiler and layout generated from Cadence® Encounter in 180nm technology. Conclusion: Based on experimental results, it is observed that the delay of the proposed method is reduced by 17.5% than the existing work.
Keywords: Accumulate Units, Booth Recorder, Fast Arithmetic, Fused Add Multiply, Multiply
Subscribe now for latest articles and news.